FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip
Payload up to 2500g, convenient balancing system, compatible with more cameras.
Applied of damping adjustment arm slider, provide better experience for balancing.The payload range is 250-2500g, motor can adapt itself automatically to work with different weight, no need for parameter setting.
- Free 2 Year Warranty
- Next Day Delivery
The innovative design of foldable handle on the FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip is wrapped by silica gel on the surface. It gives users more comfortable feeling of hand touch at any time.
The design of dismountable main body and handle gives more possibilities of accessory extension in future. And it is easy to shift from single handle mode to dual handle model to satisfy your differing needs.
The innovative design of the foldable handle is wrapped by silica gel on the surface which gives users more comfort when using the FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip.
The integration of joystick and control button on the handle of the FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip gives a better user experience. Users can shift the holding gestures between standing holding, inverted holding, frontal holding, reversed holding, high position holding and low position holding easily.
TIME-LAPSE PHOTOGRAPHY FUNCTION
The Time-lapse function can “compress” time and help users to shoot amazing videos containing the beauty of time lapse, which can’t be caught by the human eye. The Auto-rotation function and automatic shutter function of the FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip make dynamic time-lapse photography easier.
INNOVATIVE OPTIMIZATION ALGORITHM
Innovative and high-performance chips make this gimbal work perfectly. The torque of the motor is stronger. New optimization algorithm saves the redundant power, meanwhile, the motor can automatically detect the weight of different cameras and match them without requiring adjustment of the motor strength.
ROTATION ANGLE OF 3-AXIS 360° WITHOUT LIMIT
The adoption of slip ring motors at panning axis, tilting axis and rolling axis makes these 3-axis implement rotation at 360° without limitation.
EASY CAMERA BALANCING
The adoption of damping sliding arm makes the balance adjustment more convenient and easier.
User-friendly damping sliding arm with strong mechanical sensitivity help the FeiyuTech a2000 Handheld Gimbal with Dual Handle Grip achieve accurate balance when mounted with various cameras of different weights.
The nine 1/4 inch thread interfaces are compatible with all external accessories with 1/4 thread, i.e. your tripod. It could also be compatible with cold shoe mount adapter for LED fill light / flash light/soft light and other lighting accessories.
Integrated with 4-way joystick control technology, it can adjust axis angle in all directions and accurately perceive the feedback of finger driving force, achieve dynamic movement of the lens in the smooth movement.
12 hours long working time
a series gimbals come with 2 Li-ion batteries:18650, with longer battery endurance, and its working time is up to 12 hours in ideal condition.
|Product Model||a2000 3 Axis Gimbal for Mirrorless Camera|
Canon 5D Mark III (with standard lens), SONY A7RII / ILCE-7R / ILCE-5100, Panasonic LUMIX GH4/GH5, SONY NEX-5N/NEX-7 and other cameras of N-series,and other cameras with similar dimensions.
Payload : 250–2500g (Including the accessories of batteries, lens and ect. The upgraded payload (2500gram) is applied for the new firmware a2000_V18.104.22.168 or above)
|Tilting Angle||360° (Unlimited)|
|Rolling Angle||360° (Unlimited)|
|Panning Angle||360° (Unlimited)|
|Tilting Increments||2°/s ~ 75°/s|
|Panning Increments||3°/s ~ 150°/s|
|Battery||Battery model:18650, 2200mAh, 3.7V. (one positive side upward and the other negative side upward)|
Battery could be charged from external power sources by Micro USB port (It is fully charged when the LED changes from solid red to solid blue), or charged by smart charger (LED in solid red indicates the battery is charging, LED in solid blue indicates battery is fully charged).
|Installation||Camera could be placed on the left or right side by moving tilt axis to the left or right. When moving the lens forward, we suggest placing the camera on the left side so that you can use interfaces for HDMI, shutter control, headphone, microphone and so on.|
|Charging time||≥5 hours, recommending using smart charger for charging the battery(Do not use quick charger), 5V/1A input.|
|Balance Way||Moving quick plate back and forth to balance tilt axis in horizontal direction.|
Sliding the arms of three axis to balance the center of gravity of camera, and then tighten the lock screws for three axis.
|Adjusting Motor Strength||Automatic identification algorithm to detect weights of different cameras and produce right motor strength to match with them , so that the gimbal will automatically be in the best performance without adjusting the motor strength.|
|Extended Interface||There are three 1/4 inch screw holes for single handheld version of a2000 (one on the panning axis, one on the socket connector, and one on the bottom of the handle)|
There are nine 1/4 inch thread holes could be found on a2000 with dual grip handle kit: four in the middle part of foldable arm, four on the two handles, the other one is on the socket connector.
|Included accessories||USB Cable*1|
Sony shutter release*1
FY general tripod*1
Screw for camera support frame*1 (a2000)
Camera support frame*1 (a2000)
Adjusting clamping plate*1 (a2000)
Accessories for dual grip handle kit:
1/4 inch screw*1
|Optional accessories||Tripod with a 1/4 inch screw hold (make sure it can bear the weight of a2000 and the camera)|
Double-hand foldable set
(flashlight, microphone and other equipment could be added on a2000 by cold shoe which is mounted on double-hand foldable set ).
|Usage time||12 Hours|
1111.5g (not inclusive of battery, camera, lens and so forth)
|Main functions for users||Initialize the gimbal|
Firmware upgrading by computer (only supports Window for now)
Setting the start and the end of time-lapse by hand (auto-rotation mode)
Tilt and panning axis could be locked in any angle by hand
Controlling focus and take picture-control of camera (shutter release needs to be connected)
Timed photography (shutter release needs to be connected)
Connecting Feiyu ON App for firmware upgrade, setting parameters and virtual remote control
Controlled by smart remote within 4m after making a connection with it
|Main features||All three axis could turn a full circle.|
2500 gram as the maximum carry capacity makes it easy to bear most mirrorless cameras, DSLRs and camcorders. Easy to balance camera by sliding arms and lock screws. (a2000)
Automatic identification algorithm to detect weights of different cameras and Automatically match with them without adjusting the motor strength.
EVA anti collision foam added to panning axis to prevent damage to camera.
Controllable roll axis as a new highlight.
Triggle button to quickly enter lock mode and reset the gimbal.
Power on and off with a reminder of a beep, a sweet design for indoor or outdoor use.
Intelligent initialization to automatically check motionless desk and auto-complete with a reminder of a beep. Detachable handle to freely switch in installation ways.
Double-hand set is foldable ,that make it easy to carry around.
Nine extended interfaces for a variety of compatible accessories.
Anti-slip design added to handles for better grip.
Intelligently follow pre-set route in auto-rotation mode, matching motion time-lapse or automatic shooting.
Control focus and picture of camera by one shutter button.
Get panoramic pictures pretty easily by configurable Timed photography function.
Quick upgrade, set parameters, reset and virtual remote control with APP.
Three main working modes fit for most scene.